Square flanged plain linear bearing with a 12mm ID, a precision round shaft running clearance, and a standard-size aluminum housing featuring a self-lubricating Simplicity® FrelonGOLD® liner bonded directly to the bore of the housing. Unlike recirculating ball bearings, the sliding surface has no rolling elements to jam, seize, or contaminate, making it well suited for harsh conditions involving extreme heat, dirt, vibration, shock, or washdown exposure.
Linear rail and 1/2" diameter shaft, 12" in length, made from a single piece of feather-weight ceramic-coated aluminum. This one-piece gliding surface assembly is designed for self-lubricating Simplicity® linear bearings with FrelonGOLD® liners, which perform exceptionally in extreme conditions like dirt, heat, and vibration.
Double Plain Linear Bearing of 8mm JIS Metric ID with a Square Flange (end-mounted) and a precision running clearance of 0.0005" per side. The self-lubricating bearing liner is FrelonGOLD®. The bearing enables linear or rotational movement. Double sized with a square flange end-mounted JIS Metric Series (Inch and ISO Metric variants available) Precision ID running clearance (0.0005" per side) Aluminum housing with self-lubricating FrelonGOLD® liner inside Optional liners
Twin plain linear bearing pillow block, 1/4" closed self-aligning, 0.0005" per side precision running clearance, -240 to 204°C, approx. 0.2 lbs.
Miniature Linear Guide with a 20mm base width and 500mm length with a ceramic coated aluminum linear rail and anodized aluminum carriage with a Precision Running Clearance. Leverages self-lubricating Simplicity® sliding bearing technology with FrelonGold® liner under the carriage. Compatible carriage: MR20C 20mm base width and 500mm length ideal for compact applications Precision Series: 0.025-0.051mm running clearance carriage to rail Ceramic coated aluminum rail, corros
JIS plain linear bearing FJ100, 100mm closed precision ID, 0.0005" per side running clearance, -240 to 204°C, approx. 10.25 lbs.
Linear Guide Carriage of 30mm width and 80mm length, matching linear rail part number CR30. The body is made of anodized aluminum while the 3 roller bearings are made of sealed 52100 chrome steel, hardened and ground, lubricated for life, and sealed against contamination. Carriage Only - matching rail part number CR30 sold separately Rollers with threaded inner rings for easy assembly and preload adjustment Custom polymer wipers enhance motion smoothness and service life M
Round flanged plain linear bearing with an 8mm JIS Metric precision ID consisting of an aluminum housing with a self-lubricating FrelonGOLD® liner for maintenance-free linear, rotational and oscillating movement in harsh conditions like extreme heat, dirt and vibration. Round Flanged Aluminum Linear Bearing Self-lubricating FrelonGOLD® liner JIS Metric (Japanese Industrial Standards) Precision ID running clearance (0.0005" per side) Optional liners: Frelon®J (corrosive ch
Plain linear bearing guide with two 1/2" steel shafts mounted on support rails, 24" long. Pre-assembled twin-shaft guidance for Simplicity plain bearings; 1.5" wide, 1.38" high, approx. 12 lbs.
Pre-Drilled Linear Shaft of Ceramic Coated Aluminum, 1/2" diameter, 6" length. This feather-weight yet strong shaft boasts RC70 hardness, superior corrosion resistance, non-magnetic properties, vibration resistance, and immunity to weld splatter, paints, and contaminants.
1/2 Inch Diameter Carbon steel linear shaft, precision case hardened and ground, fused to a low profile AISI C-1018 Steel Linear Support Rail. This Low Profile Linear Support Rail Assembly (LSRA) is 40% lower than regular assemblies. Length: 12" Not Drilled If standard mounting holes are required on the support rail, specify this via Configure CAD & Quote below using the part number LSR-12-PD which will get you standard industry hole spacing (you can also submit drawings for
Solid Linear Support Rail of 360mm length, made to hold a 12mm diameter linear shaft that uses open style bearings. Crafted of cold stamped aluminum, this rail is undrilled but matching pre-drilled variants have PD part numbers.
