JIS plain linear bearing, 10 mm open, compensated 0.0015 in/side running clearance; -240 to 204 °C, self-lubricating.
Thin-wall plain linear bearing, 8 mm FAG interchange, compensated 0.0015 in/side; up to 8 m/s, shafts to 12 ft, approx. 0.01 lbs.
Pillow block linear ball bearing, 40 mm open ID for supported shafting; -20 to +80 °C, 2.44 x 3.15 x 2.33 in, approx. 3.31 lbs.
Pillow block linear ball bearing, 25 mm closed ID, integral mount base; -20 to +80 °C, 1.57 x 2.28 x 1.57 in, approx. 1.45 lbs.
Double plain linear bearing, 12 mm ID, square flange, compensated clearance; up to 8 m/s, -240 to 204 °C, 3.24 in long, approx. 0.13 lbs.
Double plain linear bearing, 1/2 in ID, square flanged end mount; self-lubricating up to 8 m/s, -240 to 204 °C, approx. 0.32 lbs.
Double die-set plain linear bearing, 1.00 in compensated ID, steel shell with round center flange; -240 to 204 °C, 1.56 x 2.24 x 1.56 in, approx. 1.78 lbs.
Redi-Rail stainless steel rod-type linear guide rail, 30 mm wide x 250 mm long, 1.18 in high, corrosion-resistant, approx. 0.49 lbs.
Open-type linear ball bearing, 12 mm JIS metric bore, 0.83 x 1.18 x 0.73 in envelope, -20 to +80 °C, approx. 0.07 lbs.
Heavy-duty steel U-channel linear rail, 1000 mm long x 65 mm wide, 18MnNb6 ferritic steel (yield 430 N/mm², tensile 550-770 N/mm², HB 160-210), mates with HVB-053 / HVBEA-453 rollers.
Pre-drilled stainless steel linear shaft, 1-1/4 in (31.75 mm) diameter x 12 in (304.8 mm) long, length tolerance ±0.03 in, approx. 4.26 lbs.
Miniature ball-screw linear actuator: 6 mm screw, 1 mm lead, 150 mm travel, cylindrical nut with standard no-preload, static axial load 2.144 kN, NEMA 11 motor interface.
