The powerful motors of the FAULHABER GXR series offer outstanding robustness, durability and performance as well as the possibility for customization.
Similar to a hollow-shaft motor, the FAULHABER DM-Ring stepper offers a large aperture, which allows for light signals, cables, gas or liquids to pass through.
The DC-micromotors of the FAULHABER CXR series combine power, robustness and control in a compact design together and with a high power density.
As the most powerful product family of the FAULHABER DC range, the CR series is characterized by maximum dynamics with minimum rotor inertia.
The brushless DC-servomotors of the FAULHABER BHx series offer high dynamics thanks to their low inertia and short response time.
The brushless DC-motors of the FAULHABER B product family offer precision, an extremely long service life, and high reliability.
The motors of the FAULHABER AM family are ideal for high accuracy positioning tasks. They offer a high holding torque and power density.
The BG 75 is Dunkermotoren's (Germany, AMETEK) flagship BLDC servo motor family in x25/x50/x75 stack lengths at 24/40 VDC, delivering 0.61-1.16 Nm rated and 1.95-4.10 Nm stall torque at 3700-4050 rpm with 400-950 W peak output and 50 A (2 s) peak current; a 4x1024-pulse magnetic encoder with quasi-absolute positioning, optional SI/PI/CI/MI integrated servo control with CANopen/Profinet/EtherCAT and PLG 60-75 planetary gearboxes (5-160 Nm) make it a fit for humanoid joints and mobile bases.
Tecnotion UM frameless permanent-magnet torque motors come in five frames (UM050-UM220, 50-220 mm stator OD): continuous torque 0.64-13.8 Nm, peak 2.03-43.8 Nm, motor constant 0.18-0.84 Nm/√W, bus voltage up to 48-360 VDC. The frameless design embeds directly into joint housings for direct-drive humanoid shoulders/hips/knees, cobot joints and precision gimbals.
The FAULHABER 1024...SR series are Ø10 mm coreless-winding DC micromotors: 9 V nominal (3-12 V across the series), no-load speeds to 12900 rpm, rated torque up to 1.7 mNm and stall torque up to 5.1 mNm at 82% peak efficiency, weighing just 10.8 g. Rotor inertia 0.12 gcm² and a 3.5 ms mechanical time constant give very fast dynamics; nickel-plated steel housing, -30 to +85 °C operation, stackable with planetary gearheads and encoders for dexterous hands, micro actuators and precision instruments.
Faulhaber (Germany) AM2224 is a two-phase 24-steps/rev (15° step angle) permanent-magnet stepper with 22 mNm holding torque (37 mNm boosted) in a Ø22 mm, 43 g package; windings 1.4-12 V / 0.125-1 A per phase, ±10% angular accuracy, -35~70°C, optional preloaded ball bearings and PE22-120 encoder, combinable with 22/2, 22/5 gearheads or 22L linear actuators for precision positioning in optics, medical and robot end-effectors.
TQ-RoboDrive (Germany) ILM-E is a cost-efficient frameless servo kit family spanning eight models in 50/69/85 mm frames, with 0.32-3.3 Nm rated torque, up to 10.6 Nm peak at 48 V and 7,900-12,000 rpm max speed; stators weigh only 76-822 g with 62-309 mNm/A torque constants, a spacious hollow shaft for cabling and shaft-through integration, -40~125 C stator rating, 10 pole pairs and 100% Made in Germany, targeting torque-dense robot joints, medical devices and automation.
