Miniature ball-screw linear actuator: 6 mm screw, 1 mm lead, 250 mm travel, cylindrical nut, NEMA 11 (23 mm) motor interface, 0.05 mm standard backlash, approx. 1 lbs.
Belt-driven linear actuator, 1000 mm body with 55 x 55 mm profile, dual ball profile rail guidance, steel-reinforced timing belt and 12 mm left female drive shaft; approx. 16.14 lbs.
Steel linear guide rail, 28 mm wide, 250 mm long, 12.25 mm high, U-shaped ground body with pre-drilled mounting holes every 80 mm; mates with SRS28C carriages.
16 mm x 300 mm shaft-rail assembly, RC60-hardened 1060 carbon steel shaft fused to an aluminum rail for open Simplicity bearings; approx. 1.76 lbs.
12 mm x 360 mm shaft-rail assembly, RC60-hardened 1060 carbon steel shaft fused to an aluminum rail for open Simplicity bearings; approx. 1.4 lbs.
Round-flange plain sleeve bearing, 8 mm ID, 12 mm OD, 8 mm long, lightweight aluminum alloy shell; supports linear, rotational and oscillating motion, -240 to 204 °C.
12 mm x 1 mm lead stainless lead screw, 254 mm long, precision-rolled 300 series stainless with PTFE coating and triangular anti-backlash nut; lead accuracy 0.003 in/ft.
Two-piece shaft assembly set: 1.5 in precision case-hardened ground steel shaft with 18 in low-profile LSR support rail in AISI C-1018 steel for continuous open-bearing support; approx. 10.17 lbs.
Stainless steel open pillow block plain bearing, 1.25 in precision ID, 0.0005 in per side running clearance, FDA-compliant FrelonJ liner, -240 to 204 C, approx. 5.63 lbs.
Round-flange plain linear sleeve bearing, 3/16 in ID and 1/2 in length, closed bushing for linear and rotational movement, self-lubricating FrelonGOLD liner, -240 to 204 C.
Compact lead screw slide actuator, 80 mm rail with 23 mm low profile, 10 mm screw and 2 mm lead, Constant Force anti-backlash nut, NEMA 17 single-stack motor, GST FrelonGold gliding surface, 240 N max horizontal load, approx. 1.46 lbs.
External-nut lead screw actuator, 50 mm body, 0.138 in (3.51 mm) screw with 0.024 in lead, NEMA 08 stepper motor; the restrained nut travels axially for precise micro-stroke motion.
