#Linear shafts (10)

Square Linear Shaft - Stainless Steel PST16-012-000 Diameter: 1" Length: 12"

Square linear shaft 1 x 1 in, 12 in long, 0.120 in wall, 304 stainless steel, polished for Frelon J lined square bearings.

COMPONENT

Square ShaftStainless steelCorrosion ResistanceLinear shafts

Linear Shaft of 440C Stainless Steel NIM04SS-0150-SL Diameter: 4mm Length: 150mm

440C stainless linear shaft, 4 mm x 150 mm, RC 50 Plus hardness, length tolerance +/-0.8 mm.

COMPONENT

Linear shaftsStainless steel440CSolid

Linear Shaft Support Block – RMSB08 Aluminum End Support Block 8mm Diameter

Linear shaft end support block for 8 mm shafts, aluminum body, 43 x 10 x 24 mm footprint, approx. 0.026 lbs, pairs with round-shaft bearings for simple linear guidance.

COMPONENT

Support BlockShaft End SupportAluminum-MadeLinear shafts

Drilled Linear Shaft - Ceramic Coated Aluminum CCPDL08-006.000-SL Pre-Drilled Diameter: 1/2" Length: 6"

Pre-Drilled Linear Shaft of Ceramic Coated Aluminum, 1/2" diameter, 6" length. This feather-weight yet strong shaft boasts RC70 hardness, superior corrosion resistance, non-magnetic properties, vibration resistance, and immunity to weld splatter, paints, and contaminants.

COMPONENT

Linear shaftsPre-drilledCeramic coatingsLightweight

Linear Shaft on Rail - Carbon Steel SRAM12-0360-SL Diameter: 12mm Length: 360mm

Linear Shaft made of 1060 Carbon Steel and of 12mm diameter, 360mm length with RC 60 Hardness™, fused onto an aluminum alloy linear rail, designed for open bearing variants of Simplicity® self-lubricating plain linear bearings, ball bearings, or roller bearings.

COMPONENT

Linear shaftsRailway ComponentCarbon steelRC60 Hardness

Linear Shaft and Low Support Rail - Carbon Steel - LSG12-012.000-SL (for bolting together) Diameter: 3/4" Length: 12"

3/4" diameter precision case hardened and ground steel shaft, with a matching 12" length low profile LSR steel support rail. This assembly comes as a two-piece set with a separate shaft and support rail. You can bolt the shaft to the rail to save installation time. The shaft's lifespan can be doubled by rotating it for a fresh surface when wear appears.

COMPONENT

Linear shaftsSupport railsSurface hardeningTwo-Piece Set

Linear Shaft - Ceramic Coated Aluminum CCM06-0150-SL Diameter: 6mm Length: 150mm

Solid Linear Shaft of Ceramic Coated Aluminum, 6mm diameter, 150mm length. This feather-weight yet strong shaft boasts RC70 hardness, superior corrosion resistance, non-magnetic properties, vibration resistance, and immunity to weld splatter, paints, and contaminants.

COMPONENT

Linear shaftsCeramic coatingsAluminum ShaftLightweight

Linear Shaft - Pre-Drilled Steel NIPDL08-004.000-SL Diameter: 1/2" Length: 4"

Pre-Drilled Linear Shaft made of 1060 Carbon Steel with a 1/2" diameter and 4" length, rated Class L to represent the highest Precision Tolerance and Standards Compliance. Made in the USA by PBC Linear® as RC 60 Plus™ case-hardened steel, the shaft is pre-drilled with industry standard 4 inch spacing beginning 2 inches from the end. Click "Configure and Quote" below to order custom lengths and end-tapping.

COMPONENT

Linear shaftsPre-drilledCarbon steelSurface hardening

Linear Shaft on Rail - Ceramic-Coated Aluminum SRA10CC-012.000-SL Diameter: 5/8" Length: 12"

Ceramic Coated Aluminum Linear Shaft with a 5/8" diameter and 12" length, fused onto an Aluminum Alloy Linear Rail. The shaft is feather-weight yet strong, boasting RC70 hardness, superior corrosion resistance, non-magnetic properties, vibration resistance, and immunity to splatter, paints, and contaminants. Use open bearing variants of Simplicity® self-lubricating plain slide linear bearings and other plain bearings.

COMPONENT

Linear shaftsCeramic coatingsAluminum-Guided RailSimplicity Bearing

NIL03SS420 Stainless Linear Shaft

NIL03SS420 stainless linear shaft, 3/16 in diameter, 12 in long, 420 SS, RC 50+ hardness.

COMPONENT

Linear shaftsStainless steelQuenchingPrecision Guidance