12 mm x 360 mm shaft-rail assembly, RC60-hardened 1060 carbon steel shaft fused to an aluminum rail for open Simplicity bearings; approx. 1.4 lbs.
Round-flange plain sleeve bearing, 8 mm ID, 12 mm OD, 8 mm long, lightweight aluminum alloy shell; supports linear, rotational and oscillating motion, -240 to 204 °C.
12 mm x 1 mm lead stainless lead screw, 254 mm long, precision-rolled 300 series stainless with PTFE coating and triangular anti-backlash nut; lead accuracy 0.003 in/ft.
Two-piece shaft assembly set: 1.5 in precision case-hardened ground steel shaft with 18 in low-profile LSR support rail in AISI C-1018 steel for continuous open-bearing support; approx. 10.17 lbs.
Stainless steel open pillow block plain bearing, 1.25 in precision ID, 0.0005 in per side running clearance, FDA-compliant FrelonJ liner, -240 to 204 C, approx. 5.63 lbs.
Round-flange plain linear sleeve bearing, 3/16 in ID and 1/2 in length, closed bushing for linear and rotational movement, self-lubricating FrelonGOLD liner, -240 to 204 C.
Compact lead screw slide actuator, 80 mm rail with 23 mm low profile, 10 mm screw and 2 mm lead, Constant Force anti-backlash nut, NEMA 17 single-stack motor, GST FrelonGold gliding surface, 240 N max horizontal load, approx. 1.46 lbs.
External-nut lead screw actuator, 50 mm body, 0.138 in (3.51 mm) screw with 0.024 in lead, NEMA 08 stepper motor; the restrained nut travels axially for precise micro-stroke motion.
EconoGlide closed plain linear bearing, 10 mm ID, anodized aluminum shell with self-lubricating Frelon IM liner, 5075 N max static and 725 N max dynamic load, -50 to 90 C.
Belt-driven linear actuator, 250 mm body with 55 x 55 mm profile, dual ball profile rail guidance (one internal, one external), steel-reinforced timing belt with adjustable tension and 16 mm left male drive shaft; approx. 10.03 lbs.
Low-profile Uni-Guide linear carriage, 100 mm anodized aluminum body with FrelonGOLD liner, compensated running clearance 0.064-0.089 mm, mates with UGA040R series rails; approx. weight 0.504 lbs.
Linear shaft end support block for 8 mm shafts, aluminum body, 43 x 10 x 24 mm footprint, approx. 0.026 lbs, pairs with round-shaft bearings for simple linear guidance.
