Skip to content
RobotWorld
← Back to Videos

MicroBan: A $600 Open-Source 3D-Printed Humanoid

Loading video
Loading video

Rhoban's MicroBan is a 30 cm, fully 3D-printable humanoid built with 19 Dynamixel servos and a Raspberry Pi Zero 2W, with a total build cost of about $550-$600.

HumanoidOpen SourceOpen Hardware3D PrintingDynamixelRaspberry PiDIY RoboticsRhobanMicroBanOpen-source hardware
Category: humanoid
Author: @techniahqrobot
Date: 2026-10-15T00:00:00
Duration: 105.9s
Source: https://x.com/techniahqrobot/status/2110865616059945053
Reference: https://github.com/Rhoban/microban

Related Videos

Microban: compact 3D-printed open-source humanoid robot
0:29

Microban: compact 3D-printed open-source humanoid robot

@LouisLeLay4 · 502 views · 2026-08-15
RhobanHumanoid
PLEN2: A Printable Open-Source Humanoid, Design and Code Fully on GitHub
1:23

PLEN2: A Printable Open-Source Humanoid, Design and Code Fully on GitHub

@techniahqrobot · 92 views · 2026-10-17
PLEN2Humanoid
Microban is a fully 3D-printable open-source humanoid
0:21

Microban is a fully 3D-printable open-source humanoid

@Alex__Pinel · 544 views · 2026-09-04
RhobanMicroBan
RP1: The Fully Open-Source Humanoid from RoboParty
0:25

RP1: The Fully Open-Source Humanoid from RoboParty

@Alacritic_Super · 112 views · 2026-10-15
HumanoidOpen Source
RP1: A Full-Stack Open-Source Humanoid
0:25

RP1: A Full-Stack Open-Source Humanoid

@RoboParty_DEV · 100 views · 2026-10-15
HumanoidOpen-source hardware
Sprite: Open-Source 31-Joint Humanoid Design
1:40

Sprite: Open-Source 31-Joint Humanoid Design

@techniahqrobot · 116 views · 2026-10-14
HumanoidOpen-source hardware

As an Amazon Associate, we earn from qualifying purchases.