SPINEA DriveSpin DSM is the modular variant of the DriveSpin family, combining a zero-backlash Twin Spin cycloidal gear with a servo motor in a modular package for flexible motor and interface configuration; four frames DSM 050/070/095/110 with 18-122 Nm rated output torque (DSM 070: 50 Nm rated, 100 Nm acceleration/braking), ratios 57/75, 2,000 rpm rated input. High positioning and repeat accuracy with strong torsional stiffness suit robot joints, precision turntables and industrial automation.
COMPONENT
SPINEA (Slovakia, a Timken company) DriveSpin DSF is the flat low-profile variant of the DriveSpin family, integrating a zero-backlash Twin Spin cycloidal gear with a servo motor into a compact actuator with extremely short axial length; three frames DSF 050/070/095 with 12-85 Nm rated output torque (DSF 070: 50 Nm rated, 100 Nm acceleration/braking), ratios 57/75, 2,000 rpm rated input. The built-in bearing system gives high torsional stiffness and load capacity; low mass and small size suit robot joints, AGVs and medical devices with tight height constraints.
SPINEA (Slovakia, a Timken company) DriveSpin DSH are fully sealed integrated electric actuators combining zero-backlash cycloidal reduction with a servo motor, short axial length and 8-40 mm through-hole for cables, pipes or shafts; ten frames DSH 050-170 with 18-420 Nm rated torque, peak about 2x rated (DSH070: 50/100 Nm), ratios 57-125, 2,000 rpm rated input, high positioning and repeat accuracy for robot joints, AGVs and medical devices.
SPINEA (Slovakia, now part of Timken) is a European leader in precision cycloidal reduction and integrated actuators. DriveSpin combines an optimized servomotor with a TwinSpin cycloidal gear into a zero-backlash, high-dynamic actuator with high torsional/tilting stiffness and integrated output bearing: DS Standard covers 18-460 N·m rated torque with up to 1150 N·m acceleration/braking torque, ratios 47-133, 2000 rpm rated input; DSH hollow-shaft, DSM modular and DSF flat variants complete the line. Used in 6-axis robots, gantries and manipulators, CNC machines, bending machines, medical equipment, aerospace, flight simulators, semiconductor and radar systems.
